How to Check for Moisture to Identify any Water Leakage?

Moisture inside the building brings many problems with it, besides affecting the structural strength of the affected area they also damp down the indoor air quality. The biggest problem with moisture patches is they are ideal for mold formation. These molds are not easily visible but the health hazard caused by the formation of molds starts from the damp walls in a building. 

The moisture problem in the buildings of Winnetka CA can be originated in the rainy season, flooding due to leakage or due to some natural disaster can be a reason. So, here is the quick guide of what you need to do to fight this hazard in your building.

Start with inspecting the Building 

So, the first step you can do on your own for moisture detection buildings is to identify the opening of water intrusion in the building. If there is a large volume of water build-up then too you need to first check for any water openings. Look an area where the water is accumulating on the surface, resolve it and then try to remove the surface water this is the only effective way to control the accumulated surface water.

If you are unable to solve the problem on your own you can call any service that offers you an expert inspection of moisture detection in Winnetka CA, this will save your time. As water intrusion inspection is a long and tiresome process, it will be good for you if you let experts handle it. But you can follow the above-mentioned step for any immediate action needed.

Determining the moisture and water damage

After that, you have identified the possible openings or water intrusion you need to resolve it, for that you need to call an expert as there might be a need for some technical restoration.

Also, you might need to get help in the migration of moisture to stop further contamination due to dampening which will require some tool and equipment like moisture sensors, thermo-hygrometers, penetrating and non-penetrating moisture meters, borescopes, and thermal imaging devices.

Since water can migrate from one area to another area by flowing under the walls, so check every adjoining room. Bigger the structure harder it will become to detect moisture in every part of the room but you need to be patient and carefully check for every possible place. 

If necessary, you can use thermal imagining devices which are the best way to determine the affected area not only they will tell you about the affected region in the structure but will also tell you about water flow pattern.

Establishing Drying Goals

So, the next thing that you require to do is to make drying goals for the affected structure, systems, and contents. Start with recording and documenting the moisture level of the affected areas on the structure. Then try to set the drying standard that you need, without getting proper moisture reading there is no way you can establish a fruitful drying method.

If there is a problem that you can’t determine like the moisture level of the material within the structure, then look for any other available comparable structure which you can use to establish the drying standard for the affected material.